Pre-Shipment Inspection (PSI)
Every first order from a new supplier, and periodically thereafter.
Inspection · Third-party inspection
An independent inspector on the factory floor, at the loading bay or on your site is the cheapest control you will ever buy. TRAIBCERT inspects products, production, loading, materials and vendors on behalf of buyers, project owners and manufacturers, and reports the same day so the decision to release, hold or rework is made on facts rather than on a supplier's assurance. Inspections are delivered across the UK, the Middle East and India by inspectors who know the product category, and every inspection follows a plan you approve before anyone travels.
Inspection
Third-party inspection is the examination of a product, process, installation or shipment by a body that is independent of the buyer, the seller and the manufacturer. Its purpose is to provide information on conformity with a regulation, a standard, a drawing or a purchase contract: quality, quantity, safety, fitness for use and, for plant, continued safe operation. The global testing, inspection and certification market was valued at about USD 242 billion in 2025, and the share of that work which is outsourced to independent bodies is expected to reach half by 2031, because buyers have learnt that an inspector who reports to them, not to the factory, is the only reliable way to know what is in the container before it sails or what is in the weld before the plant is commissioned.
TRAIBCERT's inspection work is organised as an inspection body in line with the international standard for bodies performing inspection, with documented inspection plans, competence records for every inspector, calibrated equipment and a report format that separates what was observed from what was concluded. Inspection is a separate activity from management system certification; an inspection report says what was found on the day and is not a certificate of the supplier's system.
Inspection services
Nine services cover the life of an order or a project, from the first units off the line to the vendor's factory gate. Each has its own page.
Every first order from a new supplier, and periodically thereafter.
A new supplier, new product or new tooling.
New suppliers, new products, or suppliers with a history of pre-shipment failures.
High-value or high-volume orders where a day of monitoring is small against the order value.
Any full-container shipment where a shortage or substitution would matter.
Fabrication of pressure vessels, boilers, heat exchangers, storage tanks and piping.
Launch parts and first-article checks for new tooling or suppliers.
Setting up a new product category or supplier where no defect library exists.
Capital projects procuring engineered equipment: pumps, compressors, vessels, exchangers, switchgear, transformers, valves, skids, structural steel and precast.
Process
Enquiry → scope and quotation (one working day) → inspection plan and date → inspection → same-day flash report → full report within two working days → release, hold or re-inspection decision.
Step 1
Tell us the product or equipment, quantity, specification or drawing, factory or site location, and the date the goods must move. A sector specialist replies within one working day with a fixed man-day quotation.
Step 2
We agree the sampling plan, checklist, reference documents, and witness and hold points for engineered equipment. For products, the default is ISO 2859-1 general inspection level II with an acceptable quality limit of 0 critical, 2.5 major and 4.0 minor unless your contract says otherwise.
Step 3
The inspector attends on the agreed date, verifies quantity and identity, draws the sample, performs the checks and tests the plan calls for, and photographs everything material.
Step 4
A pass, fail or pending result with the key findings and photographs is sent the same day, so a release or hold decision is not delayed.
Step 5
The complete report, with the sampling record, measurements, defect photographs classified by severity and the inspector's conclusion, follows within two working days.
Step 6
Where a lot is rejected, the supplier corrects and TRAIBCERT re-inspects the corrected lot; the second report references the first, so the history is traceable.
Industries
Inspection is bought wherever the cost of a defective delivery exceeds the cost of a day of an inspector's time. The most frequent users are:
Pre-shipment, during-production and container loading for orders placed with overseas factories.
Vendor inspection of structural steel, precast, mechanical and electrical plant, and NDT of site welds.
Witness testing of pressure equipment, pipes, valves and rotating machinery; NDT; expediting of long-lead items.
Component inspection, sorting and containment against control plans.
Pre-shipment inspection of packed produce and processed food for weight, labelling, packaging and condition.
Loading supervision, pre-shipment inspection for freight forwarders and traders, and damage surveys on receipt.
Pre-shipment inspection and defect classification for own-brand and marketplace goods.
Independent receipt inspection of purchased plant and equipment before acceptance and payment.
Reports
Every report carries the same information in the same order: order and supplier identification, inspection date and location, reference documents, sampling plan and sample size, quantity and packing status, results by checklist item, defects photographed and classified, measurements against tolerance, functional and safety test results, and a clear conclusion of conformity, non-conformity or pending. Reports are delivered as PDF with the photograph set and are retained for seven years so a dispute two years after delivery can be settled from the record.
A sector specialist replies to every inspection enquiry within one working day with a fixed man-day quotation. Inspections in TRAIBCERT's operating regions are booked within five working days at most locations.
Receive a flash report on the inspection day and the full report within two working days, with daily reports during production monitoring and expediting.
Inspectors are assigned by product category and discipline, including consumer goods, textiles, electrical, mechanical, welding and NDT, automotive and food. Competence records are kept for each inspector and method.
Inspections use one report format, one point of contact and one quality system across TRAIBCERT's offices and inspector network.
Checklists, defect libraries, AQLs, witness and hold points and report formats follow your specification and contract. Where needed, TRAIBCERT provides a category standard for your approval.
Inspection results can be analysed across lots, suppliers and periods to reveal recurring defects, process causes and costs, supporting supplier scorecards and development conversations.
Man-day rates are quoted in advance with travel at cost; there are no report fees, portal fees or photograph surcharges.
TRAIBCERT builds nothing, sells no software and reports to the party that commissions it, providing evidence for regulators, lenders, insurers and other parties to a dispute.
FAQs