Skip to main content
info@traibcert.org.uk UK: +44 7904 664589 UAE: +971 0526 909311

Inspection · Defect classification

Defect Classification Service

Buyer and supplier rarely disagree about whether a defect exists; they disagree about how serious it is. The defect classification service gives both parties an independent grading, against a defect library and AQL agreed in advance, so that acceptance decisions, chargebacks and supplier scorecards rest on a shared rule rather than on a negotiation.

Overview

What Defect Classification Service is

Defect classification is the systematic examination and grading of defects found in a sample, a returned population or a disputed lot. Each defect is recorded, photographed and classified as critical (a hazard, a legal non-compliance or a defect that makes the product unusable), major (a defect likely to cause a return or reduce usability) or minor (a departure from specification that does not affect use), using a written defect library specific to the product category.

The service is used to build and maintain the defect library and AQL that TRAIBCERT's other inspections apply; to settle disputes between buyer and supplier over a lot; and to analyse returns and complaints so that recurring defects, their process origin and their cost are visible to both parties.

When to use it

Is this inspection right for your order?

  • Setting up a new product category or supplier where no defect library exists.
  • Disputed lots, chargebacks and claims.
  • Returns analysis for own-brand or marketplace goods.
  • Supplier scorecards and periodic quality reviews.
  • Second-opinion grading of a factory's or a buyer's own inspection result.

Inspection checklist

What the inspector checks

  • Defect library: categories, definitions, photographs and severity rules agreed with you before use.
  • Examination of the sample or population; every defect recorded with location, size and photograph.
  • Classification against the library; borderline cases explained.
  • Result against the AQL or the contract acceptance rule.
  • Trend analysis: defect frequency by type, process stage and supplier over time.

Deliverables

What you receive

A classification report with the defect register, photographs, severity counts and the acceptance result, and, for analysis engagements, a trend report with charts by defect type, supplier and period and the process causes indicated by the pattern.

Inspection process

Enquiry → scope and quotation (one working day) → inspection plan and date → inspection → same-day flash report → full report within two working days → release, hold or re-inspection decision.

See the full inspection process

Industries

Who uses this inspection

  • Retail and e-commerce own-brand and marketplace teams.
  • Consumer goods importers and brands.
  • Automotive and electrical component buyers.
  • Manufacturers managing contract-manufacturer quality.

FAQs

Defect Classification Service questions

Why TRAIBCERT

Faster response

A sector specialist replies to every inspection enquiry within one working day with a fixed man-day quotation. Inspections in TRAIBCERT's operating regions are booked within five working days at most locations.

Real-time information

Receive a flash report on the inspection day and the full report within two working days, with daily reports during production monitoring and expediting.

Inspectors who know the product

Inspectors are assigned by product category and discipline, including consumer goods, textiles, electrical, mechanical, welding and NDT, automotive and food. Competence records are kept for each inspector and method.

One body across the UK, the Middle East and India

Inspections use one report format, one point of contact and one quality system across TRAIBCERT's offices and inspector network.