Skip to main content
info@traibcert.org.uk UK: +44 7904 664589 UAE: +971 0526 909311

Inspection · Production monitoring

Production Monitoring

Some orders are too important for a single visit. Production monitoring places a TRAIBCERT inspector at the factory for the days or weeks that matter, reporting quality, output and schedule every day, so that a buyer thousands of miles away sees the line as clearly as the factory manager does.

Overview

What Production Monitoring is

Production monitoring is continuous or scheduled inspector presence during a production run. The inspector samples units through the day, verifies in-process controls, records output against the plan, witnesses key operations (for example final testing, sealing, sterilisation or coating), and sends a daily report with photographs and quantities. Problems are raised the day they occur, not at the end of the run.

It is used for high-value, safety-critical or reputationally sensitive orders, for suppliers on probation, and for launches where a missed date has a fixed cost. The daily report is also the record that answers a later dispute over what was made, when and how.

When to use it

Is this inspection right for your order?

  • High-value or high-volume orders where a day of monitoring is small against the order value.
  • Suppliers under improvement plans or on their first orders.
  • Product launches and seasonal stock with immovable dates.
  • Processes that must be witnessed: testing, calibration, sealing, sterilisation and special coatings.

Inspection checklist

What the inspector checks

  • Daily output against schedule with a forecast of the completion date.
  • Sampling through the day at each process stage; defects logged and trended.
  • In-process controls and records; calibration of gauges and test equipment.
  • Witnessed operations recorded with photographs and instrument readings.
  • Material and component usage against the bill of materials; substitutions flagged.

Deliverables

What you receive

A daily report by email or through the client portal with output, defects, photographs and schedule forecast, then an end-of-run summary that consolidates the daily reports and states the final conformity position, ready for the pre-shipment inspection or for direct release.

Inspection process

Enquiry → scope and quotation (one working day) → inspection plan and date → inspection → same-day flash report → full report within two working days → release, hold or re-inspection decision.

See the full inspection process

Industries

Who uses this inspection

  • Manufacturing and engineered equipment buyers.
  • Retail and consumer goods importers with launch dates.
  • Medical device and food-contact product buyers where process witnessing matters.
  • Project owners with schedule-critical procurement.

FAQs

Production Monitoring questions

Why TRAIBCERT

Faster response

A sector specialist replies to every inspection enquiry within one working day with a fixed man-day quotation. Inspections in TRAIBCERT's operating regions are booked within five working days at most locations.

Real-time information

Receive a flash report on the inspection day and the full report within two working days, with daily reports during production monitoring and expediting.

Inspectors who know the product

Inspectors are assigned by product category and discipline, including consumer goods, textiles, electrical, mechanical, welding and NDT, automotive and food. Competence records are kept for each inspector and method.

One body across the UK, the Middle East and India

Inspections use one report format, one point of contact and one quality system across TRAIBCERT's offices and inspector network.