Skip to main content
info@traibcert.org.uk UK: +44 7904 664589 UAE: +971 0526 909311

Inspection · Non-destructive testing

Non-Destructive Testing (NDT)

A weld either has a defect or it does not, and the only way to know without cutting it open is non-destructive testing. TRAIBCERT provides independent NDT of materials, welds and components through technicians qualified to the recognised personnel certification schemes, with the method, acceptance criteria and reporting agreed against your code before the first probe is placed.

Overview

What Non-Destructive Testing (NDT) is

Non-destructive testing examines a material, weld or component for surface and internal discontinuities without damaging it. TRAIBCERT arranges and witnesses the five common methods: visual testing (VT), liquid penetrant testing (PT) for surface-breaking defects in non-porous materials, magnetic particle testing (MT) for surface and near-surface defects in ferromagnetic materials, ultrasonic testing (UT) for internal defects and thickness, and radiographic testing (RT) for internal defects with a permanent film or digital image. Hardness testing and positive material identification are added where the specification calls for them.

Every test is performed and interpreted by technicians holding the personnel qualification level the method and the code require, against acceptance criteria drawn from the applicable construction or product code. The report separates the raw indications from the interpretation and states the acceptance decision.

When to use it

Is this inspection right for your order?

  • Fabrication of pressure vessels, boilers, heat exchangers, storage tanks and piping.
  • Structural steel and bridge fabrication; site welds during erection.
  • Castings and forgings for rotating equipment and valves.
  • In-service inspection of plant: corrosion and thickness surveys, crack detection at known problem areas.
  • Third-party verification of a fabricator's own NDT results before acceptance.

Inspection checklist

What the inspector checks

  • Method selection and procedure against the applicable code and the material, thickness and joint type.
  • Technician qualification and equipment calibration verified and recorded.
  • Extent of testing (percentage of welds, specific joints) as the inspection and test plan requires.
  • Indications recorded, sized and evaluated against acceptance criteria; repairs re-tested.
  • Traceability: weld map, joint numbers, material certificates and welder identity linked to each result.

Deliverables

What you receive

An NDT report per method with the procedure reference, equipment and calibration, technician qualification, weld or component map, results and acceptance decision, plus radiographic images or ultrasonic scan records where produced. It is delivered within two working days of the final test, or daily for fabrication in progress.

Inspection process

Enquiry → scope and quotation (one working day) → inspection plan and date → inspection → same-day flash report → full report within two working days → release, hold or re-inspection decision.

See the full inspection process

Industries

Who uses this inspection

  • Energy, oil and gas, and petrochemicals.
  • Power generation and utilities (water, gas, district heating).
  • Construction and civil infrastructure.
  • Manufacturing: fabrication, heavy engineering, castings and forgings.
  • Transport: rail, marine and pressure-vessel transport equipment.

FAQs

Non-Destructive Testing (NDT) questions

Why TRAIBCERT

Faster response

A sector specialist replies to every inspection enquiry within one working day with a fixed man-day quotation. Inspections in TRAIBCERT's operating regions are booked within five working days at most locations.

Real-time information

Receive a flash report on the inspection day and the full report within two working days, with daily reports during production monitoring and expediting.

Inspectors who know the product

Inspectors are assigned by product category and discipline, including consumer goods, textiles, electrical, mechanical, welding and NDT, automotive and food. Competence records are kept for each inspector and method.

One body across the UK, the Middle East and India

Inspections use one report format, one point of contact and one quality system across TRAIBCERT's offices and inspector network.

Related services

Continue exploring inspection