Skip to main content
info@traibcert.org.uk UK: +44 7904 664589 UAE: +971 0526 909311

Inspection · Automotive components

Automotive Component Inspection

In automotive supply a single non-conforming part can stop a customer's line and trigger a containment demand within hours. TRAIBCERT inspects components and sub-assemblies against the drawing, the control plan and the customer's specific requirements, and provides sorting and containment when a suspect lot must be quarantined and cleared quickly.

Overview

What Automotive Component Inspection is

Automotive component inspection is dimensional, visual and functional inspection of parts and sub-assemblies to the drawing, the control plan and the applicable customer-specific requirements, using calibrated measuring equipment and the customer's gauges where provided. It covers incoming inspection at the buyer, outgoing inspection at the supplier, and third-party sorting and containment when a lot is suspect.

Sorting and containment is a defined service: 100% inspection of the suspect population, segregation of conforming and non-conforming parts, tagging, quantities reconciled, and a daily report to the customer's quality contact until the containment is closed. Rework verification confirms that reworked parts conform before they re-enter the supply.

When to use it

Is this inspection right for your order?

  • Launch parts and first-article checks for new tooling or suppliers.
  • Customer complaints and line-stop events requiring third-party containment.
  • Suppliers on controlled shipping status.
  • Incoming inspection resource shortages at tier-one and tier-two plants.
  • Remanufactured, aftermarket and imported parts where origin and conformity must be verified.

Inspection checklist

What the inspector checks

  • Dimensional inspection to drawing and control plan with calibrated equipment; results recorded per characteristic.
  • Visual and cosmetic inspection against the defect library and boundary samples.
  • Functional and fit checks with gauges and fixtures.
  • Material and process evidence: certificates, heat-treatment and plating records, traceability marks.
  • Packaging, labelling and quantity per the customer's packaging specification.
  • Sorting and containment: population, results, segregation and daily reconciliation.

Deliverables

What you receive

Inspection reports per lot or per shift with characteristic-level results, defect counts and photographs; for containment, a daily reconciliation and a closure report; formats compatible with the customer's 8D and PPAP documentation when required.

Inspection process

Enquiry → scope and quotation (one working day) → inspection plan and date → inspection → same-day flash report → full report within two working days → release, hold or re-inspection decision.

See the full inspection process

Industries

Who uses this inspection

  • Automotive tier-one, tier-two and tier-three suppliers.
  • Aftermarket and remanufacturing companies.
  • Importers of automotive parts and accessories.
  • Manufacturers of components shared with other transport sectors.

FAQs

Automotive Component Inspection questions

Why TRAIBCERT

Faster response

A sector specialist replies to every inspection enquiry within one working day with a fixed man-day quotation. Inspections in TRAIBCERT's operating regions are booked within five working days at most locations.

Real-time information

Receive a flash report on the inspection day and the full report within two working days, with daily reports during production monitoring and expediting.

Inspectors who know the product

Inspectors are assigned by product category and discipline, including consumer goods, textiles, electrical, mechanical, welding and NDT, automotive and food. Competence records are kept for each inspector and method.

One body across the UK, the Middle East and India

Inspections use one report format, one point of contact and one quality system across TRAIBCERT's offices and inspector network.