The request usually arrives in a pre-qualification questionnaire or a framework application: "Please provide evidence of your occupational health and safety management system, e.g. ISO 45001 certification." For a contractor, a manufacturer, a logistics operator or a facilities provider it is the moment the question stops being "should we" and becomes "how, and by when". This guide explains what ISO 45001 is, who asks for it, what a certificate proves and does not, and how to begin, without assuming that you have read the standard.
What is ISO 45001?
ISO 45001:2018 is the international standard for an occupational health and safety (OH&S) management system. It sets out what an organisation must have in place to identify the hazards its work creates, assess and control the risks to workers and others, comply with the law that applies to it, involve workers in the process, respond to incidents and emergencies, and improve its performance over time. It follows the same structure as ISO 9001 and ISO 14001, so an organisation that holds either will recognise the shape: context, leadership, planning, support, operation, performance evaluation and improvement. It is the standard that replaced OHSAS 18001 and it is the only OH&S management system standard that is recognised internationally. The 2018 edition is current; a revision is in development but has not been published, and certification continues to the 2018 edition.
The standard does not tell an organisation how safe it must be; that is the job of the law. It requires the organisation to build and run a system that finds its own hazards, sets its own controls and checks that they work. This is why it applies equally to a demolition contractor and a call centre: the hazards differ, the system does not.
Who needs ISO 45001?
Any organisation whose work can hurt someone, which is every organisation, can implement ISO 45001. Certification is sought when someone asks for it or when the consequences of failure are severe. The parties that ask are, in rough order of frequency: principal contractors and their frameworks, which name ISO 45001 as the accepted evidence of a health and safety management system at pre-qualification; public-sector buyers and infrastructure owners, whose tender questions on health and safety are answered in one line by a certificate; large manufacturers and energy operators, whose vendor registration portals require it of suppliers working on their sites; insurers, who underwrite employers' liability and contractors' cover on the strength of the system behind the claims record; and, increasingly, the organisation's own board, for whom a certified system is the evidence that the duty of care has been discharged.
By sector, the holders are construction and civil engineering, manufacturing and heavy industry, energy, oil and gas, utilities, transport and logistics, facilities management, waste and recycling, mining, and any organisation with lone workers, driving, working at height, machinery, chemicals or public interaction. Globally, 542,527 ISO 45001 certificates covering 941,546 sites were recorded in the 2024 survey of certificates, the third most widely held management system standard after ISO 9001 and ISO 14001. The scale of what it addresses is larger still: an estimated 2.9 million work-related deaths a year worldwide, most of them from occupational disease rather than accidents (2023 estimate), which is why the standard treats health as seriously as safety.
What the certificate proves
A certificate issued by an independent, accredited certification body states that, on the dates audited, the organisation operated an OH&S management system conforming to ISO 45001 within the scope stated on the certificate. A buyer can rely on that: the hazards have been identified, the risks assessed and controlled, legal requirements identified and checked, workers consulted, incidents investigated, and management reviewing the results. The certificate is maintained by annual surveillance audits and renewed every three years, so it is a statement about a working system rather than a single inspection.
It does not prove that no accident will happen, that every site was inspected, or that the organisation is compliant with every law on every day. Buyers who need assurance about a particular site or activity use the certificate as the baseline and add their own site inspection or audit; the two are complementary.
How ISO 45001 certification works
Certification follows the same route as every management system standard, described in full on the certification process page. After a quotation based on headcount, sites and risk, a Stage 1 audit reviews the documented system and the organisation's readiness; a Stage 2 audit, normally two to eight weeks later, tests the system in operation across the scope, on site; an independent decision issues the certificate for three years; annual surveillance audits sample the system; and recertification in year three renews it. For an organisation of 50 to 250 people on one or two sites the audits take a few days each, and the whole route from application to certificate is commonly three to five months when the system is already running. Organisations holding a certificate with another body can transfer it to TRAIBCERT without repeating the initial audits.
Benefits of ISO 45001
The commercial benefit is access: pre-qualification questions that took a page are answered with a certificate number, and frameworks that require it are open. The regulatory benefit is a system that identifies the law that applies and checks compliance on a schedule, which is what an enforcing authority expects to see after an incident. The operational benefit is fewer incidents and less lost time, because hazards are found and controlled before they cause harm, and near misses are recorded and acted on rather than forgotten; organisations that certify typically report a measurable fall in lost-time incident rates in the first two cycles, although the mechanism is the system, not the certificate. The reputational benefit is the one the board notices: a fatality or serious injury without a demonstrable management system behind the controls is a corporate failing as well as a human one, and a certified system is the evidence that the organisation took the duty seriously.
ISO 45001 and safety scheme memberships
In the UK construction supply chain, contractors are often members of health and safety pre-qualification schemes and ask whether ISO 45001 is still needed. The two are different things: scheme membership evidences that the contractor's arrangements met a questionnaire at a point in time; ISO 45001 certifies the management system behind those arrangements, audited annually on site. Principal contractors increasingly specify ISO 45001 for higher-risk packages and accept scheme membership for lower-risk ones. Holding both is common, and a certified system makes the annual scheme renewal largely a matter of uploading existing records.
Getting started with ISO 45001
Start by deciding the scope: which sites, activities and workers the system will cover, written as a buyer would read it. Then assess the gap between what you have and what the standard requires, using the readiness checklist; most organisations already have risk assessments, method statements, training records and incident reports, and the gap is usually in worker consultation, legal compliance evaluation, objectives and management review. Give the work an owner with time, and train two or three people as internal auditors so that the system is checked before TRAIBCERT checks it. If you also hold ISO 9001 or ISO 14001, build one integrated system and audit it once; the common structure is designed for this.
Frequently asked questions
Is ISO 45001 a legal requirement? No. Health and safety law applies regardless; ISO 45001 is voluntary and is a way of managing compliance and being able to prove it. Contracts and frameworks may make it a condition.
How long does certification take? Three to five months from application when the system is already operating; longer if it is being built. The audits themselves take days, not weeks.
How much does it cost? The audit fee depends on headcount, sites and the risk of the activities; TRAIBCERT quotes a fixed price for the three-year cycle in advance. The larger cost is usually internal time.
Can a small contractor be certified? Yes. The system scales to the organisation; a twelve-person contractor's system is a few procedures, site records and a management review, and the audit is priced for the size of the business.
Does ISO 45001 cover subcontractors? The organisation must control the OH&S risks of work done on its behalf, so subcontractor selection, briefing and monitoring are within the system; the subcontractors themselves are not certified by your certificate.
What replaced OHSAS 18001? ISO 45001 did, in 2018; OHSAS 18001 certificates are no longer valid.
Can it be combined with ISO 9001 and ISO 14001? Yes, and most holders do: one integrated system, one internal audit programme, one combined certification visit.
What to do next
Download the ISO 45001 readiness checklist and use it to find your gaps, then read the ISO 45001 certification page for scope, timeline and how to request a quotation. If you already hold a certificate elsewhere, the certificate transfer page explains what is needed.
Certification with TRAIBCERT: ISO 45001
Occupational health and safety management system. Tell us your sites, headcount and the date you need it by; a sector specialist replies within one working day with a fixed quotation for the whole cycle.
